Either two or four 48kHz Analogue to Digital convertors in 1RU
Each converter has potentiometer adjustment for input levels and a LED indicating overload.

The unit is supplied set up for +18dBFS unless otherwise requested but may be adjusted over the range +15dBFS to +24dBFS

Available as 2 converters in 1RU (model A2D2 - shown here ) or 4 converters in 1RU (model A2D4)

The unit has a AES input for external locking of the converters.

The converters can be supplied with either 110 ohm XLR outputs or 75 ohm unbalanced BNC outputs.
All inputs female XLR.

1RU rackmount case. Depth 150mm

This unit contains four 48kHz AES/EBU Digital to Analogue Converters
Each convertor has multiturn adjustment for output levels and a LED indicating data error.
The unit is supplied set up for +18dBFS unless otherwise requested.

Available as 2 converters in 1RU (model D2A2) of 4 converters in 1RU (model D2A4 - shown here)

The converters can be supplied with either 110 ohm XLR inputs or 75 ohm unbalanced BNC inputs.

1RU rackmount case. Depth 150mm

This unit contains 16 top quality AES impedance converter transformers.
Converts 110 ohm balanced to 75 ohm unbalanced and vice versa.

The front of the unit has 8 female XLRs and 8 BNC connectors

The rear of the unit has 8 male XLRs and 8 BNC connectors

Total depth is less than 100mm