Four wire box FW200
A simple but high quality 2 input, 2 output four wire box. FW200

 

  • Very hard wearing metal case
  • Tilt-up feet for convenient positioning
  • Push button press to talk with led illuminated buttons
  • Headphone connector takes stereo or 316 jacks
  • Phantom power (15 volt) on mic XLR
  • Rear panel multiturn mic output level trimmer
  • Rear panel speaker on/off switch
  • Rear panel XLR earth lift

Dimensions 200mm wide, 140mm deep, 62mm high

 
Four wire box FW4000

A four input, four output four wire box with two IFBs and extra features

{short description of image}

FW400

  • Switchable modes for open talkback and commentary/presenter lazy operation
  • Four wires 1 & 2 operate as IFBs without loss of four wire inputs
  • Talk keys momentary (down) and latching (up)
  • Rear panel switch to defeat key latching
  • Very hard wearing metal case
  • Tilt-up feet for convenient positioning
  • Led talk key indicators
  • Headphone connector takes stereo or 316 jacks
  • Phantom power (15 volt) on mic XLR
  • Rear panel multiturn mic output level trimmer
  • Rear panel speaker on/off switch
  • 2.5 watts RMS power amplifier
 

Dimensions: 232mm wide, 195mm deep, 100mm high

 
1RU Four wire box FW6000

We now have two versions of our 1RU four wires boxes. Please see further down for details of the FW6000XL.

The FW6000 is designed for the user requiring six four wires and more basic IFB facilities.

  • Six inputs, six outputs
  • Keys up to latch, down for momentary
  • Rear panel key latch disable
  • Audio present LEDS on each channel
  • Talk LED indication
  • Separate mic amps with adjustable gain for headset and stalk mic
  • Speaker / stalkmic / headset select switching.
  • Four wire inputs may be switched to operate as IFB interrupt feeds. DIP switches to enable IFB monitoring.
  • Hot line level microphone output.
  • Aux d9 for footswitch operation of all channels
  • Headphone socket suitable for both A and B gauge jacks.
  • Transformers on all inputs and outputs.





Dimensions: 1RU case 300mm deep
1RU Four wire box FW6000XL

The FW6000XL has all the facilities of the FW6000 but has an additional four IFB interrupt inputs which may be delegated to any or all of the unit's four wire outputs.

Each channel's volume control may be selected via front panel push buttons to listen to either the channel four wire input or Interrupt input.

Here is a view of the rear showing the IFB delegation.



Dimensions: 1RU case 300mm deep

Four wire battery belt pack BP04

A one input, one output four wire battery powered beltpack

BP04front

  • Momentary talk key illuminates when pressed
  • Mic gain adjustment
  • 5 pin XLR headset connection
  • 3 pin XLR input and output
  • Takes 'PP3' size battery
  • Battery life approximately 30 hours with alkali cell
  • Compact unit complete with belt clip

BP04rear

Dimensions: 105mm wide, 110mm deep, 30mm high

BP04side
If you cannot see a menu page click here!